Skip to main content ↑ ↓

Topics

This section allows you to view all Topics made by this member. Note that you can only see Topics made in areas you currently have access to.

Topics - tino

16
PostgreSQL / PostgreSQL upgrade instructions
Download the new postgresql version

untar , then

Code: [Select]
 
./configure 
make

Stop the old server
Code: [Select]
sudo /usr/local/pgsql/bin/pgsql.sh stop

Move the old server directory

Code: [Select]
mv /usr/local/pgsql /usr/local/pgsql-9.1.24

Now install the new server

Code: [Select]
make install

cd into the contrib/pg_upgrade directory.

Code: [Select]
make
make install

cd into the contrib/pg_upgrade_support directory.

Code: [Select]
make
make install

run the following, changing the directories to be the correct ones. old => new

Code: [Select]
su postgres

Create the new data directory

Code: [Select]
/usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data

Code: [Select]
/usr/local/pgsql/bin/pg_upgrade -b /usr/local/pgsql-9.1.24/bin/  -B /usr/local/pgsql/bin/ -d /usr/local/pgsql-9.1.24/data  -D /usr/local/pgsql/data

Copy the pgsql.sh file to the new bin location.

Code: [Select]
cp /usr/local/pgsql-9.1.24/bin/pgsql.sh /usr/local/pgsql/bin/

Code: [Select]
mkdir /usr/local/pgsql/log

Code: [Select]
chown postgres:postgres /usr/local/pgsql/log

edit the pg_hba.conf file and add the following to the end

Code: [Select]
# Allow any user from host 192.168.1.x to connect to
# any database if the user's password is correctly supplied.
# TYPE  DATABASE        USER            ADDRESS                 METHOD
host    all             all             192.168.1.0/24          md5

start the server again.
17
C Code / WatchDog Timer
Code: [Select]
#include <avr/sleep.h>
#include <avr/power.h>
#include <avr/wdt.h>

/*

 Watchdog Timer Prescale Select
 
 WDP3   WDP2 WDP1 WDP0   Number of WDT     Typical Time-out at Oscillator Cycles     VCC = 5.0V
 
 0    0    0      0             2K (2048) cycles       16 ms
 0    0    0      1             4K (4096) cycles       32 ms
 0    0    1      0             8K (8192) cycles       64 ms
 0    0    1      1            16K (16384) cycles      0.125 s
 0    1    0      0            32K (32768) cycles      0.25 s
 0    1    0      1            64K (65536) cycles      0.5 s
 0    1    1      0            128K (131072) cycles    1.0 s
 0    1    1      1            256K (262144) cycles    2.0 s
 1    0    0      0            512K (524288) cycles    4.0 s
 1    0    0      1            1024K (1048576) cycles  8.0 s
 
 */

unsigned int i = 0;

void setup(void) {

  Serial.begin(57600);

  MCUSR &= ~(1 << WDRF);                           // reset status flag
  WDTCSR |= (1 << WDCE) | (1 << WDE);              // enable configuration changes
  WDTCSR = (1<< WDP0) | ( 1 << WDP3);              // set the prescalar = 9
  WDTCSR |= (1 << WDIE);                           // enable interrupt mode
 
}


void loop(void) {

  set_sleep_mode(SLEEP_MODE_PWR_DOWN);             // select the watchdog timer mode
  sleep_enable();                                  // enable the sleep mode ready for use
  sleep_mode();                                    // trigger the sleep

  Serial.print("Woken ");
  Serial.println(i++);
  Serial.flush();
  sleep_disable();                                 // prevent further sleeps


}

ISR(WDT_vect) {
}